/index.php?route=product/product&path=59&product_id=24898
/index.php?route=information/gdpr

AX800ANEO

Dual 8” (203mm), High Output, Powered, CORE Processed, Two-Way Line Array Element

 
  • Overview
  • Specifications
  • Gallery
  • Downloads
  • Related (3)
  • Accessories (8)
  • DESCRIPTION

    The AX800A NEO is a compact lightweight powered line array element that combines superior sound quality with flexibility and ease of use in an organically styled moulded enclosure. It is designed for a wide range of general purpose indoor and outdoor live sound applications and many types of fixed installations. To fully extend low frequency response the AX800A NEO is designed to be used with the complementary SW1800A subwoofer, a compact dual 18”  hybrid manifolded bandpass design, in a recommended 4:1 ratio.


    TRANSDUCERS

    The high frequency range of the AX800A NEO is reproduced by a low distortion titanium diaphragm compression driver with neodymium magnet and edgewound voice coil, loaded by an acoustic transmission line waveguide providing detailed and natural sounding high frequencies. The exceptionally lighweight high frequency diaphragm benefits from a very low mechanical resonance that is outside of the pass band, and therefore permits the implementation of a relatively low crossover point of 900Hz.

    The two 8” neodymium woofers employed in the reproduction of the mid-bass range are equipped with very lightweight cones to ensure fast response at bass and mid-bass frequencies. They are loaded by a new aerodynamic transmission line design that results in clean mid-bass reproduction, natural cardioid behavior, and contributes towards vented cooling of the amplifier stage. The transmission line loading minimizes enclosure resonances and eliminates the “boxy” mid-bass sound commonly obtained from regular bass-reflex enclosures.


    SYSTEM CONCEPT AND SONIC PERFORMANCE

    The AX800A NEO offers a simple but innovative approach to the design of line array elements. The simple concept of the WTW symmetrical drive unit configuration is effectively implemented in order to minimize the effects of potential beaming phenomena arising from the woofers around the crossover frequency.

    The orientation and precise separation of the woofers also minimizes interference effects between them, while the use of a mechanical-acoustic polyurethane filter further reduces midrange beaming.

    The crossover filter approach is based on a “Constant Power” technique. Thanks to a particular phase combination between the two ways around the crossover frequency, this approach is able to provide a very stable horizontal coverage and a very stable off-axis sound image, also minimizing unwanted effects around the crossover frequency. The further application of phase linearization techniques, combined to constant power crossover, yield a linear phase response and a coherent time response. This allows for a natural perception of acoustic instruments and voices, and for improved depth of the sound image.


    CONSTRUCTION

    The two-part AX800A NEO enclosure is manufactured from structurally rigid polypropylene, internally ribbed to entirely eliminate cabinet resonances, and providing the precise transmission line back loading to the two 8” woofers without the need for additional internal panels. This construction results in a very strong, lightweight, and sonically neutral cabinet and allows the rigging hardware to be fully integrated, making it easy to transport and use, as well as offering the benefits of good protection against harsh environmental conditions. The positioning of the amplifier module between the outlets of the two rear ducts provides an additional level of cooling.


    POWER AMPLIFIER

    The AX800A NEO is powered by an extremely compact and lightweight CLASS D power amplifier with SMPS and PFC.  The innovative technology used for these amplifiers offers top-of-the-range performances, such as a superior sound definition at any audio frequency, very high dynamics even for low level signals, and very low distortion even at maximum power.

    The last generation compact PFC power supply with automatic mains voltage selector for world wide operation guarantees reliability and consistency in all operating conditions, with a a very high efficiency and low power consumption.

    Output power is optimised specifically to the drive units for efficient power transfer, with the low frequency section producing 800 watts while 400 watts is available for the high frequency compression driver. Input and link connections are via balanced 3-pin XLR connectors, and a ground lift switch is provided for hum-free operation. Mains power is connected through a locking Neutrik PowerCON, and a Power Out connector allows mains power to be linked to additional AX800A NEO cabinets. 


    SIGNAL PROCESSING

    The system processing is based on the new CORE2 DSP platform designed by the PROEL R&D Laboratories using one of the most advanced SHARC DSP devices available for audio applications. It features 40bit, floating point resolution and top-quality 24-bit AD/DA converters for perfect signal integrity, dynamic range in excess of 110dB, and superior sonic performance. Thanks to its massive processing power, the CORE platform is capable of providing the most sophisticated algorithms for speaker processing, including linear phase FIR filters, together with comprehensive remote control and networking capabilities.

    The PRONET AX control software, working on a solid and reliable CANBUS based network protocol, provides an intuitive interface for the remote control of the whole audio system via the rear panel etherCON RJ45 connectors, with the possibility to equalise and delay individual devices, as well as setting driver protection parameters, and monitoring the status of the amplifier.

    Four factory DSP presets are provided for when the AX800A NEO cabinets are not connected to a network, and allow for rapid and simple setup: Standard, for general purpose use of arrays up to four cabinets; Long Throw, for longer arrays requiring additional projection over distance; Downfill / Single Box, for near field applications such as stage lip fills and underneath larger line arrays as downfills; and User, allowing custom parameters to be designed in PRONET and recalled for specific situations when off-line.


    RIGGING HARDWARE

    The AX800A NEO provides built-in flying hardware as an integral part of the cabinet, offering fast and intuitive rigging from a single flypoint in mobile or fixed applications, together with excellent load-bearing capacity. It consists of a front suspension system constructed from two aluminium fast link structures, which are connected at the top to the KPTAX800 or KPTAX800L flybars with quick release rigging pins, and at the bottom to the next cabinet with quick release rigging pins. The KPTAX800 and KPTAX800L  flybars can support respectively a column of up to 4 or 12 cabinets using a single pickup point. Inter-cabinet angles are set by means of the rear cabinet links in increments of 0.5° from 0° to 7.5°. Using the KPAX8 pole adapter up to 2 cabinets can be installed on a speaker pole.


    KEY FEATURES

    • Powered two-way line array element
    • Compact lightweight moulded enclosure
    • WTW driver configuration
    • Dual 8” neodymium woofers, 1.4” HF neodymium compression driver
    • High quality, low distortion, large format compression driver with titanium diaphragm and new suspension design
    • Acoustic filter control for wide and stable 100° horizontal coverage
    • Aerodynamic transmission line back loading design resulting in clean mid-bass reproduction, natural cardioid behavior and vented cooling of the amplifier stage
    • Natural sounding transmission line HF projection wave-forming device
    • 40 bit floating point CORE2 processing with PRONET AX remote control
    • Linear phase FIR filters
    • Array optimized presets
    • Class D amplifier module with SMPS and PFC
    • Easy-to-use rigging system

    SYSTEM
    System’s Acoustic Principle Line Array Element
    Short Transmission Line LF Back Loading
    Acoustic Transmission Line HF Waveguide
    Frequency Response (±3dB) 85 Hz  –  16.8kHz  (Processed)
    Horizontal/ Vertical Coverage Angle 100° x 10° (-6dB)
    Maximum Peak SPL @ 1m 133.5 dB 
    TRANSDUCERS
    LF Two 8”(200mm) neodymium woofers, 2” (38mm) voice coil, 8Ω each, paralleled
    HF One 1.4” neodymium driver, 2.5” (64mm) edgewound voice coil, titanium diaphragm, 8Ω
    ELECTRICAL
    Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
    Input Sensitivity  +4dBu / 1.25 V
    Signal Processing CORE2 processing, 40bit floating point SHARC DSP, 24 bit AD/DA converters
    Direct access Controls 4 Presets (Standard/Long Throw/Down Fill-Single Box, User), Network Termination, GND Link
    Remote Controls PRONET AX control software
    Network Protocol CANBUS 
    Amplifier Type Class D with SMPS
    Output Power 800W + 400W 
    Mains Voltage Range (Vac) 100 - 240V 50/60Hz with PFC
    IN / OUT Connectors Neutrik XLR-M / XLR-F
    IN / OUT Network Connectors ETHERCON®(NE8FAV)
    Mains Connector PowerCon® (NAC3MPA)
    Mains Link Connector PowerCon® (NAC3MPB)
    Cooling Variable speed DC fan
    ENCLOSURE & CONSTRUCTION
    Dimensions (W x H x D) 600 mm (23.6”) x 265.5 mm (10.5”) x 516 mm (20.3”)
    Enclosure Material Polypropylene
    Rigging System 
    Front Suspension Aluminum Fast Link structure
    Back Suspension High Strength Steel with ¼ Fast Pin  
    Net Weight 22.5 Kg (49.6 lbs.)
    3D Model
    AX800A_3D.dwgTechnical Drawing 3D
    KPTAX800_3D.dwgKPTAX800 Technical Drawing 3D
    KPAX8_3D.dwgKPAX8 Technical Drawing 3D
    KPTAX800L_3D.dwgKPTAX800L Technical Drawing 3D
    Brochure
    AX800ANEOBROC22IE_BROCHUREAX800ANEO2022_ITA-ENG_LR.pdfAX800ANEO brochure
    Data Sheet
    AX800ANEO datasheet_2021.pdfData Sheet
    Technical Drawing
    KPTAX800_2D.dwgKPTAX800 Technical Drawing
    AX800A_2D.dwgTechnical Drawing
    KPAX8_2D.dwgKPAX8 Technical Drawing
    KPTAX800L_2D.dwgKPTAX800L Technical Drawing
    User Manual
    AX800ANEO_UM_ENG.pdfAX800ANEO User's Manual
    FI-0126-00-KPTAX800L.pdfKPTAX800L User's Manual
    FI-0128-00 KPAX8.pdfKPAX8 User's Manual
    FI-0124-01 KPTAX800.pdfKPTAX800 User's Manual
    KP010 KP010 Professional heavy-duty adapter, made of aluminum alloy, suitable for stands with Ø 35 mm end tube
    AXFEETKIT AXFEETKIT Kit made of 6pcs BOARDACF01 foot
    USB2CAND USB2CAND USB to CAN converter with two network connectors
    KPTAX800 KPTAX800 Flying bar for 4 AX800A
    AXCASE08 AXCASE08 Flight-case for 4 AX800A
    RAINCOV800 RAINCOV800 AX800A rain cover
    KPTAX800L KPTAX800L Flying bar for up to 12 AX800A
    KPTAX8 KPTAX8