/index.php?route=product/product&product_id=22677
/index.php?route=information/gdpr

AX1012P

12” (305mm), 2-way, full-range, Constant Curvature Array Element

 
  • Overview
  • Specifications
  • Gallery
  • Downloads
  • Related (1)
  • Accessories (3)
  • AX1012P is a versatile constant curvature full-range element that can be used to create both vertical and horizontal line source arrays and also as a high-directivity point-source loudspeaker.

    • Constant Curvature Array Element
    • 12” woofer,1.4” HF neodymium compression driver
    • Constant curvature Seamless Transition Waveguide (SWT) with 100° H x 20° V dispersion
    • Integral suspension hardware for horizontal or vertical array installation
    • Pole mounting available for free-standing applications

    The 1.4” high frequency compression driver is coupled to a constant curvature precision waveguide, which ensures a precise control of mid-high frequencies both on horizontal and vertical axis, for a perfect acoustic coupling between the enclosures that form the array. The unique waveguide design produces vertical line source directivity with a horizontal pattern that is maintained down to approximately 950Hz. This allows to project clean music and vocals evenly around the audience without hot-spots and dead-spots. The sharp SPL off-axis rejection is used to avoid reflecting surfaces in the enclosure coupling plane and perfectly adjusts the acoustic coverage to the audience geometry. The system designer or sound engineer can build true line source horizontal or vertical arrays in 20° building blocks with seamless integration between cabinets.
    The tour-grade 15mm phenolic birch plywood cabinet is provided with four integrated steels rails, to be used for coupling the cabinets with the provided aluminium coupling bars. A comprehensive set of accessories is available for creating horizontal or vertical arrays, for ground-stacking the systems and also for pole mounting one or two units.
    To extend the system’s low frequency response the AX1012P can be complemented by sub-woofers from the Axiom SW series such as SW18P.
    AX1012P is recommended for Indoor FOH (Left – Centre - Right systems), Medium-sized outdoor events or as a fill complement to large Systems, Out-fills, In-fills or distributed fill applications in a wide range of venue.

    APPLICATIONS
    • Sound reinforcement in small-to-mediumsize live venues.
    • Sidefill, Outfill or Infill applications
    • Delay systems in stadia and arenas
    • Theatres
    • Corporate & A/V
    • Theme parks
    • Houses of Worship
    • Leisure and Fitness

    SYSTEM
    System’s Acoustic Principle Constant Curvature Array Element
    Frequency Response (-6dB) 65 Hz – 17 kHz (processed)
    Nominal Impedance 8 Ω (LF) + 8 Ω (HF)
    Horizontal Coverage Angle 100° (-6dB)
    Vertical Coverage Angle 20° (-6dB)
    Sensitivity 2.83V 101 dB SPL @ 1m (LF) - 106 dB SPL @ 1m (HF)
    Maximum (peak) Output 134 dB SPL @ 1m
    TRANSDUCERS
    LF 1.4" exit, neodymium magnet compression driver - 2.4" Aluminum VC
    HF 12" ferrite magnet low frequency woofer - 3" aluminum VC
    INPUT CONNECTIONS  
    Connector Type Neutrik® speakON™ NL4MP x 2
    Input Wiring LF = Pin 1+/1-         HF = Pin 2+/2-
    POWER HANDLING  
    Input Power Rating (AES) 600W + 75W
    Input Power Handling (Program) 1200W + 150W
    ENCLOSURE & CONSTRUCTION
    Width 246 mm (9.7")
    Height 611 mm (24.0")
    Depth 500 mm (19.7")
    Enclosure Material 15mm, reinforced phenolic birch
    Paint High resistance, water based paint
    Flying system Captive suspension system
    Net Weight 29 kg (63.9 lbs)
    Data Sheet
    AX1012P datasheet 2019.pdfAX1012P Data Sheet
    User Manual
    AX1012P_UM_ENG_2019-12-10.pdfAX1012P User's Manual
    KPTAX1012H KPTAX1012H AX1012 Horizontal Array Flying Bar
    KPTAX1012V KPTAX1012V AX1012 Vertical Array Flying Bar
    KPTAX1012T KPTAX1012T AX1012 Suspension Bar