/index.php?route=product/product&product_id=26316
/index.php?route=information/gdpr

SW215FAV2

Dual 15” (380mm), Very High Output, Manifolded Band Pass, Powered, CORE Processed, Subwoofer System - FLYING VERSION

 
  • Overview
  • Specifications
  • Gallery
  • Downloads
  • Related (2)
  • Accessories (3)
  • Systems
  • The SW215AV2 subwoofer is designed to deliver high quality low frequency reproduction where very high output is a key requirement, together with well defined deep bass response and fast transient response. Its compact size and light weight make it suitable for several different uses, ranging from touring applications to fixed installations and high-level dance clubs. SW215AV2 represents the evolution of SW215AV2, with which it maintains full electroacoustic and mechanical compatibility.

    DESCRIPTION
    The SW215AV2 is a very high quality powered subwoofer system featuring some of the most advanced technologies for low frequency reproduction. Its unique and innovative design is based on a configuration that can be defined as Manifolded Band Pass.  It uses manifolding of the front side of the cones to maximize the mutual coupling between the two drivers. This innovative configuration does not use any large resonant cavity to load the speaker, but very compact cavities in order to obtain advantages in terms of definition, both at the lowest end and the upper bass.

    TRANSDUCERS
    The SW215AV2 subwoofer system is equipped with two high power 15” (380mm) transducers capable of long excursion (up to 33mm peak-to-peak), controlled by high stiffness Double Silicon Spider as centering suspension and by heavy duty surround.  The motor structure features high strength (BL²/Re) with optimized symmetry and excursion controlled by Aluminum  Demodulating Ring. The robust copper 75mm (3”) voice coil is wounded in two different layers both outside and inside the coil support, then doubling the coil surface exposed to air cooling and consequently improving the long term thermal capacity of the loudspeaker. Cones are made of very high-stiffness reinforced paper, featuring also invisible water repellent treatment.

    PERFORMANCES
    The SW215AV2 represents an innovative subwoofer design that features unprecedented performances in terms of low frequency definition and “punchy” feeling in the upper bass range.  The combination of accuracy in acoustic transient response together with the use of latest technology in transducers linearity, signal processing and power amplifiers allows the SW215AV2 to deliver unprecedented low frequency reproduction quality with solid deep end, together with very fast and accurate bass response.

    SIGNAL PROCESSING and POWER AMPLIFIERS
    The system processing is based on the CORE2 DSP platform designed by the PROEL R&D Laboratories using one of the most advanced SHARC DSP for audio application. It features 40bit floating point resolution and top-quality 24bit AD/DA converters, for a perfect signal integrity, a dynamic range in excess of 110dB and a superior sonic performance. Thanks to its massive processing power, the CORE2 platform is capable of providing the most sophisticated algorithms for speaker processing, together with remote control and networking capability. The PRONET AX control software, working on a solid and reliable CANBUS based network protocol, provides an intuitive interface for the remote control of the whole system, with the possibility of eqing, delaying, increasing the protections and monitoring the status of the amplifier.
    The SW215AV2 is powered by a new generation of CLASS D power amplifiers with digitally-controlled SMPS and latest generation single-stage PFC. The innovative technology used for these amplifiers offers performances at the top of the range, such as a superior sound definition at any audio frequency, very high dynamics also for low level signals and very low distortion even at the maximum power. The superior sound quality can be compared with top-of-the-range AB-class analog systems, while the SW215AV2 power modules feature a higher dynamics, very compact size and light weight and efficiency above 90%. The power module employed for powering the SW215AV2 delivers in an ultra-compact package a total power of 2800W, 1400W for each of the two woofers. Such a large reserve of power means that the amplifier can handle very high voltage peaks, resulting in an impressive dynamic performance.

    HARDWARE
    The SW215AV2 is available in two versions, with (code SW215FAV2) or without (code SW215AV2) the flying hardware. In the SW215FAV2 model the built-in suspension system allows one or more sub-woofers to be flown together with the AX2065 vertical array module. The flying system is extremely simple to use and a complete array can be flown in a flash by just a couple of people. The SW215AV2 offers a cost effective solution for all applications where flying the sub-woofers in not needed.

    • Very High Output
    • Compact size for a very good output-to-weight ratio
    • Manifolded Band Pass configuration for a high output in a compact size
    • High-strength, water repellent cones
    • Long-excursion split coil for extended linear response
    • 40 bit floating point CORE2 processing with PRONET AX remote control
    • Digitally controlled Class D amplifier module with SMPS and PFC
    SYSTEM  
    System’s Acoustic Principle Manifolded Band Pass
    Frequency Response (±3dB) 39 Hz  –  100 Hz    (Processed)
    Maximum Peak SPL @ 1m 139 dB 
       
    TRANSDUCERS  
    Type Two 15” (380mm), 3” (75mm) VC 
    Cone High stiffness, water repellent
    Voice Coil Type Flux Demodulating Ring
    Suspension Double Centering Spider
       
    ELECTRICAL  
    Input Impedance 20 kΩ balanced, 10 kΩ unbalanced
    Input Sensitivity  +4dBu / 1.25 V
    Signal Processing CORE2 processing, 40bit floating point SHARC DSP, 24 bit  AD/DA converters
    Direct access Controls 4 Presets (Standard/InfraSub/Cardioid/ User), Network Termination, GND Link
    Remote Controls PRONET AX control software
    Network protocol CANBUS 
    Amplifier Type Class D with SMPS and PFC
    Output Power 1400W + 1400W 
    Mains Voltage Range (Vac) 100 - 240 V~ ±10% 50/60 Hz
    IN / OUT Connectors Neutrik XLR-M / XLR-F
    IN / OUT Network Connectors ETHERCON®(NE8FAV)
    Mains Connector PowerCon® (NAC3MPA)
    Cooling Variable speed DC fan
       
    ENCLOSURE & CONSTRUCTION  
    Physical Dimensions  
    Width 571 mm (22.48”)
    Height 800 mm (31.50”)
    Depth 582 mm (22.91”)
    Depth Including Wheels 710 mm (27.95”)
    Enclosure Material 15mm, reinforced phenolic birch
    Paint High resistance, water based paint
    Suspension system (SW215FA)  
    Side Suspension High Strength Steel with ¼ Fast Pin
    Back Suspension High Strength Steel with ¼ Fast Pin 
    Wheels 4 heavy-load 100 mm ø
    Net Weight SW215A: 64.5 Kg (142.20 lbs.) - SW215FA: 68.5 Kg (151 lbs.)
    3D Model
    sw215fa-3D.dwgTechnical Drawing 3D
    KPTSW215.3dsTechnical Drawing 3D
    sw215fa_3D.3dsTechnical Drawing 3D
    KPTSW215-3D.dwgTechnical Drawing 3D
    Data Sheet
    SW215AV2_data sheet 2023.pdfTechnical Data Sheet
    Technical Drawing
    sw215fa_2D.dwgTechnical Drawing
    KPTSW215-2D.dwgTechnical Drawing
    User Manual
    FI-0109-03 KPTSW215.pdfKPTSW215 User's Manual
    SW215AV2-SW215FAV2_UM_ENG.pdfUser's Manual
    KPTSW215 KPTSW215 Flying bar for AX2065 and SW215
    RAINCOV215 RAINCOV215 SW215 rain cover
    USB2CANDV2 USB2CANDV2 USB to CAN converter with two network connectors